Mac Music  |  Pc Music  |  440 Audio Software  |  440Forums  |  440tv  |  Zicos  |  AudioLexic

Harmonic

From AudioLexic

Jump to: navigation, search

In acoustics and telecommunication, the harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency. For example, if the frequency is f, the harmonics have frequency 2f, 3f, 4f, etc. Harmonics come from the mathematical ability through fourier decomposition of any periodic signal into sine waves with frequencies integer multiples of the fundamental frequency.

Many driven oscillators, including the human voice, a bowed violin string, or a Cepheid variable star, naturally tend to be periodic, and thus can be decomposed into harmonics.

Most passive oscillators, such as a plucked guitar string or a struck drum head or struck bell, naturally oscillate at several frequencies known as overtones. When the oscillator is long and thin, such as a guitar string, a trumpet, or a chime, the overtones are integer multiples of the fundamental frequency. Hence, these devices can mimic the sound of singing and are often incorporated into music. Overtones whose frequency is not an integer multiple of the fundamental are called inharmonic and are often perceived as unpleasant.

The untrained human ear typically does not perceive harmonics as separate notes. Instead, they are perceived as the timbre of the tone. In a musical context, overtones which are not exactly integer multiples of the fundamental are known as inharmonics. Inharmonics which are not close to harmonics are known as partials. Bells have more clearly perceptible partials than most instruments. Antique singing bowls are well known for their unique quality of producing multiple harmonic overtones or multiphonics.

The tight relation between overtones and harmonics in music, often leads to their being used synonymously in a strictly musical context, but they are counted differently leading to some possible confusion. This chart demonstrates how they are counted:

1f 440 Hz fundamental frequency first harmonic
2f 880 Hz first overtone second harmonic
3f 1320 Hz second overtone third harmonic
4f 1760 Hz third overtone fourth harmonic

In many musical instruments, it is possible to play the upper harmonics without the fundamental note being present. In a simple case (e.g. recorder) this has the effect of making the note go up in pitch by an octave; but in more complex cases many other pitch variations are obtained. In some cases it also changes the timbre of the note. This is part of the normal method of obtaining higher notes in wind instruments, where it is called overblowing. The extended technique of playing multiphonics also produces harmonics. On string instruments it is possible to produce very pure sounding notes, called harmonics by string players, which have an eerie quality, as well as being high in pitch. Harmonics may be used to check at a unison the tuning of strings which are not tuned to the unison. For example, lightly fingering the node found half way down the highest string of a cello produces the same pitch as lightly fingering the node 1/3 of the way down the second highest string. For the human voice see Overtone singing, which uses harmonics.

Harmonics may be either used or considered as the basis of just intonation systems. Composer Arnold Dreyblatt is able to bring out different harmonics on the single string of his modified double bass by slightly altering his unique bowing technique halfway between hitting and bowing the strings.

The fundamental frequency is the reciprocal of the period of the periodic phenomenon.


[edit] Harmonics on stringed instruments

The following table displays the stop points on a stringed instrument, such as the violin, at which gentle touching of a string will force it into a harmonic mode when vibrated. 3rd bridge guitars are guitars that have an additional bridge with which these harmonics are essential to create volume on the inverse-side when a string is attacked on the counterpart.

harmonic stop note harmonic note cents reduced
cents
2 octave P8 1200.0 0.0
3 just perfect fifth P8 + P5 1902.0 702.0
4 just perfect fourth 2P8 2400.0 0.0
5 just major third 2P8 + just M3 2786.3 386.3
6 just minor third 2P8 + P5 3102.0 702.0
7 septimal minor third 2P8 + septimal m7 3368.8 968.8
8 septimal major second 3P8 3600.0 0.0
9 Pythagorean major second 3P8 + pyth M2 3803.9 203.9
10 just minor whole tone 3P8 + just M3 3986.3 386.3
11 greater unidecimal neutral second 3P8 + just M3 + GUN2 4151.3 551.3
12 lesser unidecimal neutral second 3P8 + P5 4302.0 702.0
13 tridecimal 2/3-tone 3P8 + P5 + T23T 4440.5 840.5
14 2/3-tone 3P8 + P5 + septimal m3 4568.8 968.8
15 septimal (or major) diatonic semitone 3P8 + P5 + just M3 4688.3 1088.3
16 just (or minor) diatonic semitone 4P8 4800.0 0.0

[edit] See also

This article was started using a Wikipedia article
Personal tools